Access Panel - HP EliteOne 800 G3 Maintenance & Service Manual

4. Lift the stand up (2), and then pull the stand hooks out of the computer (3).

Access panel

The computer has one main rear access panel that allows access to internal components.
To remove the access panel:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Pull up the notches (1) of the access panel, and then lift the access panel off the computer (2).
To replace the access panel, reverse the removal procedures.
Preparing to disassemble the computer on page
Removing the rear port cover on page
Stands on page 20).
19).
19).
Access panel 21