Table of Contents
Advertisement
›
To move the headrest down, press the securing button
arrow
and hold it down while pressing the headrest in the direction of ar-
2
row
.
3
CAUTION
If the tablet holder adapter is secured to the guide rods of the front headrests
» page
83, do not push the headrests down to the stop – risk of damaging
the headrests.
Removing/inserting the front headrests
Fig. 77 Removing/inserting the front headrest
›
To remove, hold the locking button
the support in the direction of arrow
›
To insert the headrest, push the headrest into the seat backrest in the direc-
tion of arrow
until the locking button clicks into place.
3
Removing/inserting the rear headrests
Fig. 78 Removing/inserting the rear headrest
74
Using the system
in the direction of
A
in direction of arrow
and remove
A
1
» Fig.
77.
2
›
To remove, hold the locking button
the same time, use a flat screwdriver (with a max. width of 5 mm) to push
the locking button in the opening
the headrest in the direction of arrow
›
To insert the headrest, push the headrest into the seat backrest in the direc-
tion of arrow
until the locking button clicks into place.
4
Seat heaters
Fig. 79 Buttons for heating the front /rear seats
The seat backrests and surfaces of the front seats and the outer rear seats can
be heated electronically.
Seat heating buttons
» Fig. 79
Left seat heating
Right seat heating
›
To turn on the heater at maximum heat (level 2), press button or .
By repeatedly pressing the button, the heat is turned down until it is complete-
ly switched off. The level of the seat heating is indicated by the number of illu-
minated warning lights in the switch.
The seat heating only operates when the engine is running.
in the direction of arrow
A
1
in the direction of arrow
and remove
B
2
» Fig.
78.
3
, and at
Advertisement
Table of Contents
