Table of Contents
Advertisement
›
To remove the SD card, go tot he main Media menu and tap the function
surface → Tap on Remove safely.
›
Push down on the inserted SD memory card. The SD card "jumps" into the
eject position.
CAUTION
Do not use an SD card with a broken write protection slide - there is a risk of
■
damage to the SD card reader!
When using an SD card with an adapter, vehicle vibrations might cause the
■
card to fall out of the adapter.
USB input
Installation location of the USB input and information regarding its use
» page
77.
At the USB input, an audio source can be connected directly or via a connect-
ing cable.
›
To connect, insert the USB audio source into the appropriate input.
›
To disconnect the USB, go to the main Media menu and tap on the function
surface → Tap on Remove safely.
›
Disconnect the audio source from the corresponding USB input.
Charging a USB audio source
With the ignition, the charging process starts automatically after the USB au-
dio source is connected (applies to audio sources where charging via the USB
connector is possible).
The charging efficiency can differ compared to charging from the usual mains
power supply.
Depending on the type of the connected external device and the frequency of
use, the charging current may not be sufficient to charge the battery of the
connected device.
Some connected audio sources may not recognise that they are being charg-
ed.
CAUTION
USB extension cables or reducers may impair the function of the connected
audio source.
124
Infotainment
Note
We recommend that you use extension cables from ŠKODA Original Accesso-
ries.
AUX input
Installation location of the AUX input
›
To connect, insert the plug of the AUX audio source into the appropriate
connector.
›
To disconnect, pull the plug out of the AUX audio source.
CAUTION
The AUX input must only be used for audio devices!
■
If the external audio source connected to the AUX input is equipped with an
■
adapter for external power supply, the sound may be impaired.
Note
The 3.5 mm stereo jack plug is used for the AUX input.
■
We recommend that you use extension cables from ŠKODA Original Acces-
■
sories.
®
Bluetooth
player
Does not apply to Infotainment Blues.
The Infotainment system allows you to play back audio files from a connected
®
Bluetooth
player using the A2DP and AVRCP audio profile.
With the Infotainment system, multiple devices can be paired using Blue-
®
tooth
, but only one of them can be used as a Bluetooth
Connecting/disconnecting
›
®
To connect the Bluetooth
player to the Infotainment system, follow the
same instructions as for pairing the Infotainment system with a telephone
» page
133.
›
®
To disconnect the Bluetooth
player, end the connection in the list of paired
external devices
» page
133.
®
Replacing the Bluetooth
player (applies to Infotainment Amundsen)
®
To replace a Bluetooth
player, which is also connected to the Infotainment
system as a telephone, a corresponding information message will be displayed
on the Infotainment screen.
» page
77.
®
player.
Advertisement
Table of Contents
