Table of Contents
Advertisement
CAUTION
Keep the system sensors
» Fig. 202
■
and ice, and do not cover them with any objects of any kind, otherwise the
functioning of the system may be restricted.
In adverse weather conditions (heavy rain, water vapour, very low or high
■
temperatures, etc.), the functioning of the system may be impaired - "incorrect
recognition of obstacles".
Accessories additionally installed on the vehicle rear, such as bicycle carriers,
■
can impair the system function.
Settings in Infotainment
Read and observe
and
›
In the Infotainment, in menu
manoeuvring.
ParkPilot – Settings for the parking aid
■
Activate automatically – Activate/deactivate the compact parking aid display
■
(when driving forward)
Front volume – Adjust the volume of the beeps for obstacle detection in front
■
Front tone setting – Setting the pitch of the beeps for obstacle detection in
■
front
Rear volume – Set the volume level of the beeps for the rear obstacle detec-
■
tion
Rear tone setting – Setting the pitch of the beeps for the rear obstacle detec-
■
tion
Entertainment fading while parking – Lowers the audio volume (e.g. radio vol-
■
ume) with activated parking aid
on page 177 clean and free from snow
on page 176 first.
, tap in the function surface → Parking and
Operation
Fig. 202 Installation location of the sensors on the left side of the vehi-
cle: front/rear
Read and observe
and
The system uses ultrasound waves to calculate the distance between the
bumper and an obstacle. The ultrasonic sensors are, depending on vehicle
equipment,, located in the back or in the front bumper
Depending on the equipment, the following system versions are possible
» Fig.
203.
Variant 1: warns of obstacles in areas
▶
▶
Variant 2: warns of obstacles in areas
Fig. 203
Sampled areas and range of the
sensors
on page 176 first.
» Fig.
202.
,
.
C
D
,
,
,
.
A
B
C
D
Assist systems
177
Advertisement
Table of Contents
