Table of Contents
Advertisement
Information system
Driver information system
Display in the instrument cluster
Fig. 37 Display types: MAXI DOT/Segment Display
Depending on the vehicle's equipment, the information system uses the dis-
play in the instrument cluster to provide the following information
Time / symbols of the Infotainment voice control
1
Engaged gear / gear recommendation
2
Selector lever positions for the automatic gearbox
Warning lights of the START-STOP system
Compass display
Driving data (multifunction display)
3
Warning lights
Information messages
Door alarm
Service interval display
Outside temperature
4
Speed regulating system / speed limiter
5
Total distance travelled
Distance travelled by resetting the memory (trip)
6
Time
7
Warning lights of the START-STOP system
8
Engaged gear / gear recommendation
Selector lever positions for the automatic gearbox
48
Using the system
Outside temperature
9
Warning lights
Driving data (multifunction display)
Total distance travelled
10
Distance travelled by resetting the memory (trip)
Speed regulating system / speed limiter
Service interval display
Information messages
Fuel gauge
11
Door, luggage compartment and bonnet alarm
When the door or luggage compartment / bonnet is open, a graphic warning
appears in the display.
An acoustic signal will also sound if you drive the vehicle above 6 km/h when a
door is open.
Reset counter for distance travelled (trip)
›
Press button
A
» Fig.
37.
Setting the time
›
Switch on the ignition.
›
Press and hold the button
›
Release the button
›
Press the button
›
Wait 4 seconds, the system switches to the minutes setting.
›
Press the button
›
Wait 4 seconds, the system switches to the initial setting.
» Fig. 38
on page 48.
Fig. 38
Button in the instrument cluster
A
» Fig. 38
until the time is shown in the display.
and the system switches to the hour setting function.
A
again and set the hours.
A
again and set the minutes.
A
Advertisement
Table of Contents
