Table of Contents
Advertisement
The entry to be searched for (such as a telephone contact) must be entered
along with any special characters (diacritics).
By tapping on the function surface a list of matching entries opens.
Switching Infotainment on/off
Applies to Infotainment Amundsen, Swing, Blues
›
To switch Infotainment on/off, press
Automatic switch-on of Infotainment
If Infotainment was not switched off with
off, it will automatically switch on when the ignition is switched on.
Automatic switch-off of Infotainment
If the vehicle key is pulled out of the ignition lock while Infotainment is switch-
ed on, Infotainment will switch off automatically.
If the vehicle is fitted with the starter button, Infotainment will switch off au-
tomatically after the engine is switched off and the door is opened.
With the ignition off, Infotainment will automatically switch off after about 30
minutes.
Infotainment switches off automatically under certain circumstances. Infotain-
ment informs you of this via a text message on the Infotainment display.
Infotainment restart
If Infotainment stops responding (if it "freezes"), it can be restarted by press-
ing and holding
for longer than 10 s (does not apply to Infotainment Blues).
Show time and date on the screen
Does not apply to Infotainment Blues.
You can display the time and date on the Infotainment screen in standby mode
and in "Screen off" mode.
Standby mode
With the ignition on and infotainment off (Standbymode), it is possible to dis-
play the time and date on the Infotainment screen.
Applies to Infotainment Amundsen
To switch the time and date display on/off, press the
▶
the function surface → Screen → Show clock in standby mode.
100
Infotainment
.
before the ignition was switched
button, then tap
Applies to Infotainment Swing
To switch the time and date display on/off, press the
▶
the function surface Screen → Show clock in standby mode.
The display mode can be changed by moving your finger sideways across the
screen (does not apply to Infotainment Swing).
"Screen off" mode
With the ignition on and functions Screen off (in 10 s) and Display clock when screen
is off
» page 105
enabled, it is possible to display the time and date when the
Infotainment screen is switched off.
The display type depends on the display mode selected in standby mode (does
not apply to the Infotainment Swing).
Adjusting the volume
Every change in volume is displayed on the screen.
Applies to Infotainment Amundsen, Swing
›
To increase the volume, turn the controller
›
To decrease the volume, turn the controller
›
To mute, turn the controller
›
or: To activate/deactivate the mute setting, press the
to Infotainment Swing).
Applies to Infotainment Blues
›
To increase the volume, turn the control switch
clockwise.
›
To decrease the volume, turn the control switch
›
To mute, turn the controller
1
The following symbol appears on the screen when the sound is muted .
If playback was coming from a source in the Media menu at the time of mut-
ing, then playback will be stopped (not applicable to AUX).
CAUTION
High volumes can cause sound resonance in the vehicle.
■
When changing or connecting an audio source, this may cause sudden
■
changes in volume. Reduce the volume before changing or connecting an au-
dio source.
button, then tap
clockwise.
anticlockwise.
anticlockwise to 0.
button (applies
» Fig. 126
on page 97
1
anticlockwise.
1
anticlockwise to 0.
Advertisement
Table of Contents
