Table of Contents
Advertisement
Infotainment settings - Amundsen
Infotainment system settings
Sound settings
›
Press the
button, then tap on function surface .
Volume - Volume settings
■
Radio announcements - Volume adjustment of traffic announcements (TP)
■
Navigation announcements - Volume setting for navigation announcements
■
Voice control - Volume setting for voice output
■
Maximum switch-on volume - Set the maximum volume when switching on In-
■
fotainment
Speed-dependent volume adjustment - increases the volume as speed increases
■
AUX volume: - Sets the volume for the device connected via AUX
■
Quiet - Low volume
■
Medium - Medium volume
■
Loud - High volume
■
Bluetooth audio: - Volume adjustment of the external device connected via
■
®
the Bluetooth
audio profile
Quiet - Low volume
■
Medium - Medium volume
■
■
Loud - High volume
Entertainment fading while parking - Lowers the audio volume (e.g. radio volume)
■
when the parking aid is activated
Entertainment fading (nav. announce.) - Lowers the audio volume (e.g. radio vol-
■
ume) in the event of a navigation announcement
Bass - Mid - Treble - Setting the equalizer
■
Balance - Fader - Sets the balance between left and right, front and rear
■
■
ŠKODA Surround - Switch surround sound on/off (cannot be used in Radio
mode)
Virtual Subwoofer -Switch virtual subwoofer on/off (cannot be used in Radio
■
mode)
Touchscreen tone - Switch audible tone when touching the screen on/off
■
No navigation announcements during calls - Switches the navigation prompts on or
■
off during a telephone conversation
Display settings
›
Press the
button, then tap on function surface → Screen.
Menu: - Setting the infotainment menu display
■
Horizont. display - list
» Fig. 133
■
Grid display - Grid display
» Fig. 132
■
Screen off (in 10 s) - Enable/disable the automatic display shut-off function
■
Display clock when screen is off - Time and date display when the screen is
■
switched off
Brightness: - Screen brightness setting
■
Touchscreen tone - Switch audible tone when touching the screen on/off
■
Animation when finger near screen - Switch the proximity sensors on/off (when
■
the function is on the bottom bar with function surfaces will be displayed e.g.
in the main Navigation menu when you move a finger towards the screen)
Show clock in standby mode - Time and date displayed on the screen when the
■
ignition is switched on and Infotainment is switched off
Time and date settings
›
Press the
button, then tap on function surface → Time and date.
Time Source: - Time source settings: manual/GPS (applies to infotainment
■
Amundsen)
Time: - Time Settings
■
Summer (DST) - Switches summer time on/off
■
Automatic summer time - Switches the automatic switch to summer time on/off
■
Time zone - Sets the time zone
■
■
Time Format: - Sets the time format
Date: - Date settings
■
Date format: - Sets the date format
■
Infotainment language settings
›
Press the
button, then tap on function surface → Language.
›
Select the Infotainment language.
In some languages, after selecting the function surface, Female or Male are dis-
played for the choice of Infotainment voice prompts.
Note
When a language is selected which does not support voice control, Infotain-
■
ment will indicate this with a message on the screen.
The messages are generated by Infotainment. Flawless clarity (e.g. road or
■
city name) cannot always be guaranteed.
on page 101
on page 101
Infotainment settings - Amundsen
105
Advertisement
Table of Contents
