Table of Contents
Advertisement
Fuses and light bulbs
Fuses
Introduction
Individual electrical circuits are protected by fuses. A blown fuse is recognisa-
ble by the molten metal strip
» Fig. 269
WARNING
Always read and observe the warnings before completing any work in the
engine compartment
» page
204.
CAUTION
Replace the faulty fuse with a new one of the same amperage.
■
If a newly inserted fuse again blows after a short time, then seek assistance
■
from a specialist garage.
"Do not repair" the fuses and do not replace them with stronger fuses - dan-
■
ger of fire and damage to another electrical system.
Note
We recommend always carrying replacement fuses in the vehicle.
■
There can be several power-consuming devices for one fuse. Multiple fuses
■
may exist for a single power-consuming device.
230
Do-it-yourself
Fig. 269
Blown fuse
/.
Fuses in the dashboard
Read and observe
and
The fuses are located on the bottom of the dash panel behind a cover.
Replacing fuses
›
Remove the ignition key, turn off the lights and all electrical consumers.
›
Remove the cover of the fuse box
›
Remove the plastic clip from the holder in the fuse box cover.
›
Use the clip to pull the fuse out, then insert a new fuse.
›
Replace the bracket at the original position.
›
Insert the top edge of the cover into the dash panel first.
›
Push the lower edge of the cover in the region
Fig. 270
Remove the fuse box cover.
on page 230 first.
» Fig. 270
in the direction of the arrow.
.
A
Advertisement
Table of Contents
