Table of Contents
Advertisement
Seats and head restraints
Front seats
Introduction
WARNING
Only adjust the driver's seat when the vehicle is stationary – otherwise
■
risk of accident!
Caution when adjusting the seat! You may suffer injuries or bruises as a
■
result of adjusting the seat without paying proper attention.
Adjusting the front seats
Read and observe
on page 72 first.
The seats can be adjusted by the pulling or pushing the operating element in
the direction of the arrows
» Fig.
Adjusting the seat in the longitudinal direction (after releasing the control
A
lever must lock audibly)
Adjusting height of seat
B
Adjust the tilt of the backrest (during adjustment, release the backrest and
C
select the required tilt using your back)
Note
After a certain time, play can develop within the adjustment mechanism of the
backrest angle.
72
Using the system
Fig. 72
Control elements on the seat
72.
Armrest setting
Read and observe
on page 72 first.
›
To adjust the height, lift the armrest in the direction of the arrow
one of the locking positions
» Fig.
›
To close, lift the armrest in the direction of arrow
fold down again.
Rear seats
Seat backrests
Fig. 74 Folding the seat backrest forwards/standby position of the seat
belt
Before folding the seat backrests forwards, adjust the position of the front
seats in such a way that they are not damaged by the seat backrests. If neces-
sary, remove the rear head restraints
Folding forward
›
Push the headrest into the seat backrest until it clicks into position.
Fig. 73
Adjusting the armrest
73.
past the stop and then
A
» page
74.
A
into
Advertisement
Table of Contents
