Table of Contents
Advertisement
Information on the cooling system
After pressing the buttonthe indicator light on the button lights up, even if
not all the conditions for the cooling system have been met. The cooling sys-
tem starts to work as soon as the following conditions have been met
» page
91.
Note
To ensure adequate thermal comfort, during operation of the manual air condi-
tioning there could be an increase in the engine idle speed in some circumstan-
ces.
Climatronic (automatic air conditioning)
Fig. 121 Controls the Climatronic
Read and observe
on page 91 first.
Individual functions can be adjusted or switched on by turning the dial or
pressing the corresponding button
Setting temperature
1
▶
Reduce the temperature /
Selected temperature
2
Degrees Celsius or Fahrenheit
3
Automatic operation of the air conditioning system is switched on
4
Intensive air flow to the windscreen switched on
5
Direction of air flow
6
Recirculated air mode activated
7
Cooling system activated
8
Set blower speed
9
92
Using the system
» Fig.
121.
Increase the temperature
Set the blower speed (the set blower speed is indicated by the corre-
10
sponding number of segments in the display)
▶
Turn to the left: Decrease speed / switch off Climatronic
▶
Turn to the right: Increase speed
Interior temperature sensor
11
Switching on/off the intensive windscreen air flow - when this function
is switched on, the warning light illuminates in the button
Switching on automatic mode
Switching the airflow to the windows on and off
Switching the airflow to the upper body on and off
Switching the airflow to the footwell on and off
Switching recirculation on/off
Switch the cooling system on/off
When this function is switched on, the corresponding icon appears in the dis-
play.
After the cooling system is switched off, only the ventilation function remains
active, whereby the lowest temperature that can be reached is the outside
temperature.
Setting temperature
In the range between 16 °C to 29 °C, an automatic temperature control takes
place.
At a temperature setting below 16 ° C, lights up in the temperature display,
the Climatronic functions with maximum cooling performance.
At a temperature setting above 29 °C, lights up in the temperature display,
the Climatronic functions with maximum heating output.
Switching between Celsius and Fahrenheit
Press the and buttons simultaneously and hold for about 2 s, the dis-
play shows the desired unit (position
CAUTION
Do not cover the interior temperature sensor
the Climatronic could be affected.
Note
In order to ensure adequate thermal comfort, there may be an increase in en-
gine idle speed during operation of the Climatronic in some circumstances.
» page 93
» page 93
» Fig.
121).
3
» Fig. 121
– the function of
11
Advertisement
Table of Contents
