Switching voice control on/off
Switch on
›
Press the button on the multifunction steering wheel or button
the Infotainment system.
The main menu is displayed
» Fig.
Switch off
›
Press the button twice on the multifunction steering wheel or button
on the Infotainment system.
›
or: Issue the voice command "End voice control".
Operation principle
The voice control main menu
» Fig. 135
mands for the individual menus.
Other voice commands are displayed by tapping the respective function sur-
face, if required, by issuing the name of respective command (e.g. navigation).
The screen shows the following
Fig. 135
Voice control: Main menu
135.
Fig. 136
Example of screen display
on page 103 contains basic voice com-
» Fig.
136.
Context-dependent:
A
▶
The system is waiting for a voice command
▶
The system recognises a voice command
▶
The system plays a message
Voice command entry was stopped
▶
Available list entries
B
Possible voice commands
C
Displaying other possible voice commands
Voice commands that can be issued are indicated in "quotation marks".
on
Note
Depending on the equipment, the voice control symbols
displayed on the display of the instrument cluster.
Voice commands
Enter
The voice commands must only be issued when the
on the Infotainment screen and the input tone has completely faded. The in-
put tone can be switched on/off. To do this, press
Voice control.
It is not necessary to wait for the end of message playback when Infotainment
is playing a message. The Infotainment message can be terminated by pressing
the button
or button on the multifunction steering wheel. Then a voice
command can be issued. Voice control is much faster as a result.
Stop
This allows more time to enter the voice command (e.g. in the list of retrieved
contacts).
The process for entering voice commands can be stopped by moving a finger
up/down across the screen or by turning the controller .
When stopping, the symbol changes from
» Fig. 136
are also
A
symbol is displayed
and then tap on →
to .
103
Infotainment operation