CyberData 011030 Operation Manual page 26

18 Installing the VoIP Indoor Intercom
Configure the Intercom Parameters
Web Page Item
Default Gateway
DNS Server 1*
DNS Server 2*
CyberData Corporation
3. After changing the parameters, click Save Settings. This updates the changed parameters and
reboots the Intercom if appropriate.
4. Connect the Intercom to the target network.
5. From a system on the same network as the Intercom, open a browser with the new IP address of
the Intercom.
Table 2-5. Network Setup Parameters
Description
Enter the Default Gateway address.
Enter the DNS Server 1 address.
Enter the DNS Server 2 address.
Click this button to save your configuration settings. Changing a
parameter that has an asterisk next to it will cause a system reboot
when saved.
Link to the Intercom Setup page.
Link to the SIP Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
930260A Operations Guide