Removing And Replacing Dimms - HP Synergy 480 Gen9 Maintenance And Service Manual

6. Remove the Smart Storage Battery from the DIMM baffle, if installed.
To replace the component, reverse the removal procedure.

Removing and replacing DIMMs

CAUTION:
To prevent improper cooling and thermal damage, always install DIMMs of the same height on the
compute module. This compute module does not support mixing standard and non-standard height
DIMMs.
To identify the DIMMs installed in the compute module, see "DIMM identification."
To remove the component:
Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel.
5. Remove all DIMM baffles.
6. Remove the DIMM.
Removing and replacing DIMMs 37