Component Identification; Front Panel Leds And Buttons - HP Synergy 480 Gen9 Maintenance And Service Manual

Component identification

Front panel LEDs and buttons

Item Description
1 UID LED
2 Health status LED
3 Mezzanine NIC status LED
4 Power On/Standby button and system
power LED
*If all other LEDs are off, then no power is present to the compute module. If the health LED is flashing green
while the system power LED is off indicates that the Power On/Standby button service is initializing or that an
58 Component identification
Status
Solid blue = Activated
Flashing blue (1 Hz/cycle per sec) = Remote
management or firmware upgrade in progress
Off = Deactivated
Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is rebooting
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical
Solid green= Link on any Mezzanine NIC
Flashing green= Activity on any Mezzanine NIC
Off = No link or activity on any Mezzanine NIC
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power
on sequence
Solid amber = System in standby
Off = No power present*