Download Print this page

HP Synergy 480 Gen9 Maintenance And Service Manual: Removing And Replacing The Drive Backplane; Removing And Replacing The Internal Sata Board

Compute module.
Hide thumbs

Advertisement

Removing and replacing the drive backplane

To remove the component:
Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel.
5. Remove all drives.
6. Remove all drive blanks.
CAUTION:
Remove all drives and drive blanks before removing the drive backplane.
7. Remove all DIMM baffles.
8. Remove the front panel/drive cage assembly.
9. Remove the drive backplane from the front panel/drive cage assembly.
To replace the component, reverse the removal procedure.
Removing and replacing the internal SATA board
To remove the component:
Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel.
5. Remove all drives.
6. Remove all drive blanks.
CAUTION:
Remove all drives and drive blanks before removing the drive backplane.
Removing and replacing the drive backplane
45

Advertisement

Troubleshooting

   Also See for HP Synergy 480 Gen9

   Related Manuals for HP Synergy 480 Gen9

Comments to this Manuals

Symbols: 0
Latest comments: