Replacing A Pass-Thru Module; Replacing An Existing Module - HP 10GbE Pass-Thru Module User Manual

Replacing a pass-thru module

Replacing an existing module

CAUTION:
network communications between the server blade network ports and the network
infrastructure.
For continued blade-server network communication and services availability before removing
the module, redirect critical high-availability services or applications to use the redundant
network ports.
CAUTION:
Remove and label the cables.
1.
Remove the module.
2.
Slide the new module fully into the interconnect bay. For more installation information, see "Installing
3.
the module (on page 9)."
Close the ejector lever and wait for the module to boot completely.
4.
Removing the pass-thru module from a powered enclosure results in the loss of
Do not connect the pass-thru module until after configuration.
Get other manuals https://www.bkmanuals.com
Replacing a pass-thru module 13