Download Print this page

HP Synergy 480 Gen9 Maintenance And Service Manual: Mezzanine Connector Definitions

Compute module.
Hide thumbs

Advertisement

Position
Default
S4
Off
S5*
Off
S6* **
Off
S7
Off
S8
S9
S10
S11
S12
*You can access the redundant ROM by setting S1, S5, and S6 to On.
IMPORTANT:
Before using the S7 switch to change to Legacy BIOS Boot Mode, be sure the HPE Dynamic Smart
Array B140i Controller is disabled. Do not use the B140i controller when the compute module is in
Legacy BIOS Boot Mode.

Mezzanine connector definitions

64
Mezzanine connector definitions
Function
Reserved
Off = Power-on password is enabled.
On = Power-on password is disabled.
Off = No function
On = Restore default manufacturing settings
Off = Set default boot mode to UEFI.
On = Set default boot mode to legacy.
Reserved
Reserved
Reserved
Reserved
Reserved

Advertisement

Troubleshooting

   Also See for HP Synergy 480 Gen9

   Related Manuals for HP Synergy 480 Gen9

   Related Content for HP Synergy 480 Gen9

Comments to this Manuals

Symbols: 0
Latest comments: