Removing And Replacing A Processor - HP Synergy 480 Gen9 Maintenance And Service Manual

CAUTION:
To avoid damage to the system board, processor socket, and screws, do not overtighten the heatsink
screws.
2. Align and install the heatsink. Alternate tightening the screws until the heatsink is seated properly.
3. Install all DIMM baffles.
4. Install the access panel.
5. Install the compute module.

Removing and replacing a processor

WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
2
2
1
2
2
Removing and replacing a processor 41