Removing And Replacing A Compute Module End Cap; Removing And Replacing The Front Panel/Drive Cage Assembly - HP Synergy 480 Gen9 Maintenance And Service Manual

Compute module
Hide thumbs Also See for Synergy 480 Gen9:
Table of Contents

Advertisement

To replace the component, reverse the removal procedure.

Removing and replacing a compute module end cap

To remove the component:
Procedure
1. Place the compute module on a flat, level work surface.
2. Remove the compute module end cap.
To replace the component, reverse the removal procedure.

Removing and replacing the front panel/drive cage assembly

Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel.
5. Remove all drives.
6. Remove the front panel/drive cage assembly.
34
Removing and replacing a compute module end cap

Advertisement

Table of Contents
loading

Table of Contents