Table of Contents
Advertisement
Hot Swap Fan and Power Modules
An individual failed power module or fan module can be replaced by a customer network technician while the fabric
module is powered up (hot swap) as described in this section.
Replacing a Power Supply Module
A single failed power supply module can be hot swapped as follows:
Procedure
1. Unplug the power cord from the power supply module.
2. Press the latch to the left and pull the handle.
3. Insert the replacement power supply module into the chassis slot until fully seated and the latch snaps into place.
NOTE: Each power supply module is keyed to insure correct orientation.
4. Connect the power cord.
5. Verify that the Power LED lights solid green.
Replacing a Fan Module
A single failed fan module can be hot swapped as follows:
Hot Swap Fan and Power Modules
41
Advertisement
Table of Contents
