Diaphragm Rupture Sensor; Relay - ProMinent Sigma 2 S2Cb Operating Instructions Manual

14.7

Diaphragm rupture sensor

Contact (standard)
14.8

Relay

Data
Switch on peak current, (for approx. 100
ms)
Electrical data at 230 V
Data
Switch on peak current, (for approx. 100
ms)
* internal switchover
Fuses
Fuse Value
Fuse, internal 6.3 AT - (1.5 kA)
Only use the original fuses from ProMinent! It is not sufficient
to use a fuse with the above fuse rating.
Contact loading, max.
at voltage Maximum current
30 V DC 1 A
The contact is an opener.
The contact is an potential-free.
For safety reasons we recommend connecting to a pro‐
–
tective low voltage, e.g. in accordance with EN 60335-1
(SELV ).
The cable can be poled as required.
–
The technical data for the relay are contained in the chapter
"Installation, electrical".
Technical data
Value Unit
4 A
Value Unit
8 A
Part no.
732379
83