Table of Contents
Advertisement
14.7
Diaphragm rupture sensor
Contact (standard)
14.8
Relay
14.9
Sound pressure level
Sound pressure level
Data
Switch on peak current, (for approx. 100
ms)
Electrical data at 230 V
Data
Switch on peak current, (for approx. 100
ms)
Fuses
Fuse
Value
Fuse, internal
3.15 AT - (1.5 kA)
Only use the original fuses from ProMinent! It is not sufficient
to use a fuse with the above fuse rating.
Contact loading, max.
at voltage
Maximum current
30 V DC
1 A
The contact is an opener.
The contact is an potential-free.
For safety reasons we recommend connecting to a pro‐
–
tective low voltage, e.g. in accordance with EN 60335-1
(SELV ).
The cable can be poled as required.
–
The technical data for the relay are contained in the chapter
"Installation, electrical".
Sound pressure level LpA < 70 dB in accordance with EN ISO
20361:2010-10
at maximum stroke length, maximum stroke rate, maximum back pressure
(water)
Technical data
Value Unit
4 A
Value Unit
8 A
Part no.
732414
83
Advertisement
Table of Contents
