Before Starting The Setup; Flow Of Setup - GRAPHTEC CE6000 SERIES Setup Manual

Before starting the Setup

Make the following preparations before starting Setup.
•
Check that all of the items included in the package. (Please see the User's Manual (PDF).)
For the Parts Names, please see the User's Manual (PDF).
•
Assemble this Cutting Plotter, and set up it. For the assembling procedures, see either Manual attached to the Stand or
User's Manual (PDF).
•
To use the Cutting Master 4, previously install the Design application (Adobe Illustrator or CorelDRAW) that is used.
For the latest supported version, please visit our website.
•
When there are virus detection program or system resident program, terminate them beforehand.
•
Upon installation, be sure to log into Windows using an account with administrator privileges on your computer.
CAUTION
Usage of the software
Each of the Cutting Plotter Controller/Graphtec Studio software is engaged in various settings on the Cutting Plotter. Do not use them at
the same time.

Flow of setup

Setting up the Plotter main unit
1. Attaching a Tool
2. Loading Media (Paper or Marking Film)
3. Aligning the Push Rollers
4. About the Initial Setup screen
5. Set the media type into the Plotter
6 Tool adjustment and test cutting
Installing the Software
•
Setup in a Windows operating environment
Launching the Start menu
A. Install CE6000Plus Software
Installing the Cutting Plotter Controller
Installing the Driver software
(Cutting Plotter Driver)
• To connect using the USB
Install the software as necessity.
B. Setup the Graphtec Pro Studio
C. Setup the Cutting Master 4
D. Install the User's Manual
•
Setup in a Macintosh operating environment
A. Setup the Cutting Master 4
B. Setup the Graphtec Studio
The cutter blade can replaced depending on the material or thickness of the
media.
Fix the media to the Plotter.
Adjust the position of the push roller.
Select "Display Language" and "Length Unit".
Set the media type to the Cutting Plotter, depending on the set media.
Adjust the protruded cutter edge length and the cutting Force depending on the material
and thickness of the media. Make test cutting for the set media to adjust the best condition.
For each software, install them using the Installer housed in the attached
DVD-ROM.
Once Cutting Plotter Controller is installed, you can control main functions of
the Cutting Plotte through the PC.
The Driver software controls the Plotter and makes plotting according to the
data created by the PC.
Turn on the power source of Plotter in the middle of installing, and connect the USB cable.
Software enabling cutting data to be created through simple commands.
Create designs and edit characters/shapes using this software.
Plug-in driver that enables simple cutting through direct operation from within
Adobe Illustrator and CorelDRAW.
Installs the User's Manual.
Plug-in driver that enables simple cutting through direct operation from within
Adobe Illustrator.
Software enabling cutting data to be created through simple commands.
Create designs and edit characters/shapes using this software.
2
P.03
P.04
P.09
P.10
P.10
P.11
P.14
P.16
P.16
P.17
P.18
P.18
P.18
P.19
P.19