Before Starting The Setup - GRAPHTEC FCX4000 Series Setup Manual

Before starting the Setup

Make the following preparations before starting Setup.
Check that all of the items included in the package. (Please see in the User's Manual (PDF).)
For the Parts Names, please see in the User's Manual (PDF).
To use the Cutting Master 4, previously install the design application (Adobe Illustrator or CorelDraw ) that is used.
For the latest supported version, please visit our website.
When there are virus detection program or system resident program, terminate them beforehand.
Upon installation, be sure to log in Windows/Macintosh using an account with administrator privileges on your computer.
Setting up the Plotter main unit
1. Attaching a Tool
2. Loading the Media
3. About the Initial Setup screen
Installing the Software
Setup in a Windows operating environment
Launching the Start menu
A. Install FCX4000 Software
Installing the Driver software (Cutting
Plotter Driver)
Install the software as necessity.
B. Setup the Graphtec Pro Studio
C. Setup the Cutting Master 4
D. Install the User's Manual
Setup in a Macintosh operating environment
A. Setup the Cutting Master 4
B. Setup the Graphtec Studio
The cutter blade can replaced depending on the material or thickness of the
media.
Set up the media in the Plotter.
Select "Display Language" and "Length Unit".
For each software, install them using the Installer stored in the attached DVD-
ROM.
The Driver software controls the Plotter and makes plotting according to the
data created by the PC.
Turn on the power source of Plotter in the middle of installing, and connect the USB cable.
Software enabling cutting data to be created through simple commands.
Create designs and edit characters/shapes using this software.
Plug-in driver that enables simple cutting through direct operation from within
Adobe Illustrator and CorelDRAW.
Install the User's Manual.
Plug-in driver that enables simple cutting through direct operation from within
Adobe Illustrator.
Software enabling cutting data to be created through simple commands.
Create designs and edit characters/shapes using this software.
2
P.03
P.04
P.05
P.05
P.07
P.09
P.09
P.11
P.11
P.11
P.12
P.12