Nfs Port Status Values; Ports Used - HP 16-port SCS Installation Instructions Manual

NFS port status values

Table 6-6 describes the port status values that may be reported by the SCS for NFS history file operations.
Table 6-6 NFS port status values
Value Description
1 Mount needed.
2 Error opening history file—Still retrying.
3 Error opening history file—Gave up.
4 Current write error encountered (on most recent write file).
5 Recent write error encountered (most recent write succeeded).
6 Current overrun encountered, and no recent write errors have occurred (unable to write to the file fast enough).
7 Recent overrun encountered, and no recent write errors have occurred (unable to write to the file fast enough).
9999 No recent errors.

Ports used

Table 6-7 lists the UDP and TCP ports numbed used by the SCS and the attached server and devices. The values
assume a default configuration. Some values are configurable.
Table 6-7 Ports used by SCS
Port type and number
TCP 22
TCP 23
UDP 69
TCP/UDP 111
UDP 123
UDP161
TCP/UDP 2049
UDP 3211
TCP 3211
TCP 3001-30xx
TCP 3101-31xx
Direction
Inbound on SCS
Inbound on SCS
Inbound on SCS and outbound on device
Outbound on device
Outbound on device
Inbound on SCS
Outbound on device
Inbound on SCS
Inbound on SCS
Inbound on SCS
Inbound on SCS
Used for
SSH2, if enabled
Telnet
TFTP
NFS, if enabled
NTP, if enabled
SNMP, if enabled
NFS, if enabled
Secure protocol
Secure protocol
Telnet serial sessions with ports
SSH serial sessions with ports
Technical specifications 88