Show Commands - HP 16-port SCS Installation Instructions Manual

Server SSH command
The Server SSH command enables or disables SSH session access to the SCS and specifies the SSH authentication
method. When you enable SSH, all SCS sessions will be terminated if an SCS SSH server key must be generated.
You must also have previously specified an authentication method other than None with the Server Security
command.
If you enable plain text Telnet connections with a Server Security command, enabling SSH session access with
the Server SSH command will add that as a valid connection method (both plain text and SSH connections will be
allowed.) See "Using SSH."
Access right: SCON
Access level: APPLIANCEADMIN
Syntax:
server ssh enable|disable [auth=<auth>]
Table 5-27
Server SSH command parameters
Parameter
ENABLE|DISABLE
AUTH=<auth>

Show commands

The Show command has several forms, as listed in Table 5-28.
Table 5-28 Show command summary
Command
Show NFS
Show NTP
Show Port
Show Port In/Out
Show Server
Show Server CLI
Show Server PPP
Show Server RADIUS
Show Server Security
Show Server SNMP
Show User
Show NFS command
The Show NFS command displays NFS configuration information and the current mount status. If a mount error
occurred, the display also includes the error message returned by the NFS server.
If NFS has never been enabled on the SCS, the default values appear. If NFS was previously enabled, successfully
configured, then later disabled, the display will retain the configured address, mount point, and file type values.
Description
Enables or disables SSH session access to the SCS.
SSH authentication methods. You must enter the entire value. Abbreviations are not permitted. Valid
values are:
PW Password authentication
KEY Key authentication
PW|KEY Password or key authentication
KEY|PW Key or password authentication
PW&KEY Password and key authentication
KEY&PW Key and password authentication
Default = PW
Description
Displays NFS mount status and configured values
Displays configured NTP values
Displays port information
Displays how carriage returns and linefeeds are treated
Displays SCS configuration information and statistics
Displays SCS CLI settings
Displays SCS PPP settings
Displays SCS RADIUS settings
Displays SCS authentication, connection, and security lock-out settings
Displays SNMP configuration information
Displays user configuration and session information
SCS commands 67