Show Server Cli Command - HP 16-port SCS Installation Instructions Manual

Show Server CLI command

The Show Server CLI command displays the serial CLI settings.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show server cli
Table 5-32 Show Server CLI command display fields
Field
CLI Port
Access Character
History
Connect
Modeminit string
Server CLI Timeout
Show Server PPP command
The Show Server PPP command displays the current PPP settings that were configured with the Server PPP
command.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show server ppp
Show Server RADIUS command
The Show Server RADIUS command displays the current SCS RADIUS settings that were configured with the
Server RADIUS command.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show server radius
Content
Console port terminal type.
Control character used to access the CLI.
Indicates whether a port's history buffer content is displayed (auto) or not displayed (hold) when
a user connects to the port and whether the buffer content is cleared (clear) or kept (keep) when
a session ends.
Indicates whether a valid user on the console port may use the Connect command.
String used to initiate modem connections on the console port.
Session time-out value, shown in full minute or minute:second form (for example, 3m for 3 minutes,
3:30 for 3 minutes, 3 seconds.
SCS commands 71