Show Server Command - HP 16-port SCS Installation Instructions Manual

Show Port In/Out command
The Show Port In/Out command displays the translation settings for all ports. These translation settings indicate
how carriage returns and linefeeds are treated in incoming and outgoing serial data.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show port in|out

Show Server command

The Show Server command displays SCS configuration information, statistics, and the current time.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show server
Table 5-31 Show Server command display fields
Field
Server
Mask
Gateway
Up Time
MAC
S/N
Port
Username
Duration
Socket
From Socket
IP Input and Output
TCP
UDP
BOOT
APP
Share Mode
Content
IP address (from initial configuration or Server Set command)
Subnet mask (from initial configuration or Server Set command)
Gateway IP address (from initial configuration or Server Set command)
Days, hours, minutes, and seconds since unit was rebooted
Ethernet MAC address
Serial number
Port number
User name (from User Add command)
Duration of session
Telnet socket number
Telnet client IP address with socket number in parentheses
Network IP statistics, including number of packets delivered and discarded and fragments
Network TCP statistics, including in segs, out segs, errors, and retransmissions
Network UDP statistics, including in, out, errors, and no port events
BIOS/Bootstrap version, date, and time
Application version that is running, plus its date and time
DISABLE, AUTO, or QUERY (from Server Share command)
SCS commands 70