User Unlock Command - HP 16-port SCS Installation Instructions Manual

The following command deletes the SSH key information for JohnDoe. The command will complete successfully only if
JohnDoe has a password configured in a previous User Add or User Set command and if there are other users
with USER access rights.
> user set key=""
The following command adds the group Dev3 for JohnD. He may now access the ports defined in group Dev3, as
well as ports in other groups that were previously configured for him.
> user set group=+Dev3

User Unlock command

The User Unlock command unlocks a user who was previously locked out. After this command completes, the user
can attempt login authentication again.
Access right: USER
Access level: ADMIN (may unlock all except APPLIANCEADMIN) or APPLIANCEADMIN
Syntax:
user unlock <username>
Table 5-44 User Unlock command parameter
Parameter
<username>
Description
User name to be unlocked
SCS commands 77