Server Commands - HP 16-port SCS Installation Instructions Manual

Access right: None needed
Access level: All
Syntax:
resume

Server commands

The Server command has several forms, as listed in Table 5-13.
Table 5-13 Server command summary
Command
Server CLI
Server FLASH
Server Init
Server PPP
Server RADIUS
Server Reboot
Server Security
Server Set
Server Share
Server SNMP
Server SNMP Community
Server SNMP Manager
Server SNMP Trap
Server SNMP Trap
Destination
Server SSH
Description
Specifies the console port type, CLI access character, modem initialization string, port history
mode operations, and port time-out value. It also enables and disables device connection from
the console port.
Updates the unit FLASH.
Reinitializes the SCS.
Enables and disables PPP connections to the console port.
Specifies RADIUS server parameters.
Reboots the unit.
Specifies user authentication method, enables and disables security lock-out, and enables and
disables connection methods.
Changes the SCS network configuration.
Specifies session sharing settings.
Enables and disables UDP port 161 SNMP processing.
Defines read, write, and trap SNMP community strings.
Defines or deletes SNMP management entities.
Enables and disables SNMP traps.
Defines or deletes destinations for enabled SNMP traps.
Enables and disables SSH session access to the SCS and specifies the SSH authentication
method.
SCS commands 59