Advertisement
19
A handy accessory is this surface
mount plug that connects up to
three servos. One each side of the
fuselage makes assembling the
model at the field nice and easy.
Available
where
all awesome
airplanes (Extreme Flight) are sold
With some low adhesive painters
tape, mark the location of screws
for the cowling as shown (the
center of the tabs).
Place the canopy on the fuselage,
and tape the cowling on. Locate the
"Cowling & Canopy" screws.
Make sure that the front is
centered on your motor, and has
the appropriate spacing for the
propeller to spin clear of the
cowling.
Advertisement
