Advertisement
18
Using a drop of thread locker on
the bolts, bolt the motor to the
firewall using a 3mm hex driver.
Connect the motor to your speed
control, battery and radio system
to test the direction of the motor.
Thread the battery wires and radio
wire through the former. Mount
the speed control to the side of the
motor box so that it receives good
air flow.
Photo shows a mount using zip
cable ties and small amount of
foam padding.
Follow guidelines from your radio
manufacturer
to
mount
receiver and connect electronics.
Apply Velcro to battery tray for
securing battery pack.
your
Advertisement
