Ruijie Networks RG-S8605E Hardware Installation And Reference Manual page 10

The chassis should be mounted in a place with sufficient space for air circulation. Sufficient space (10 cm at
least) must be reserved at the air intakes and exhaust vents for ventilation.
If any module slot is unoccupied, install a filler panel to enable proper airflow.
RG-S8607E
Specifications
Model RG-S8607E
Module Slot Two supervisor module slots, five service module slots
Supervisor Module M8600E-CM
Switch Fabric Not supported
Module
M8600E-08XS-ED
M8600E-44SFP4XS-ED
M8600E-24GT20SFP4XS-ED
M8600E-48GT-ED
M8600E-48GT-P-ED
M8600E-48XS-DB
M8600E-24XS4QXS-DB
Service Module
M8600E-12QXS-DB
M8600E-24SFP/8GT-EB
M8600E-24GT/8SFP-EB
RG-WALL 1600-B-ED
M8600E-08XS-EF
M8600E-44SFP4XS-EF
M8600E-48GT-EF
Hot Swapping Supported
Supervisor Module
Supported
Redundancy
RG-PA1600I: 90 to 180 VAC, power: 1200W;
RG-PA600I: 90 to 180 VAC, power: 600W:
RG-PA1600I-P: 90 to176 VAC, power: 1000W;
Power Supply RG-PA1600I-PL: 90 to 176 VAC, power: 1000W;
Module
RG-PA3000I- PL: 90 to 176 VAC, power: 1200W;
RG-PD1600I: -40 to -75 VDC, power: 1400W
RG-PD600I: -40 to -75 VDC power: 600W
RG-PA1600I: 192 to 216 VDC, power: 1200W;
RG-PA600I: 192 to 290 VDC, power: 600W
HVDC Power
Supply
Power Supply
The power supply redundancy of the same model is supported.
Redundancy
180 to 264 VAC, power: 1600W
180 to 264 VAC, power: 600W
176 to 264 VAC, power: 1600W
176 to 264 VAC, power: 1600W
176 to 210 VAC, power: 2500W
210 to 264VAC, power: 3000W
216 to 290 VDC, power: 1600W
The power supply supports reversible HVDC.
The HVDC-supported PDU socket should be provided.
It is recommended to install a DC air switch. During power-on, turn on the DC air
switch after connecting the power cord. During power-off, turn off the DC air switch
before removing the power cord.