Usage - Gazer H714 User Manual

You can use the MVR for security recordings when the car is parked.
ENG
When the ACC powers off the MVR will continue recording for the
period set in the «Auto-off time». Only after that will it shut down.
If «Never» setting is selected, the MVR continues recording and
shuts down only when the battery voltage drops below the value set
in the «Car battery protect» menu. This prevents the car battery
from complete discharge.
Note:
Before adjusting the «Car battery protect» setting consult
with your car service station.
When the ACC power is off, the MVR can operate in two modes that can
be selected in the «Parking Mode» menu.
1. MVR operation with the «Parking Mode» off.
In this mode, once the ACC power is turned off, the MVR continues
recording for one hour (set as default) but its recording speed is
reduced to 10 frames per second to save space on your memory
card. If the G-sensor detects an impact, this recording will be
automatically protected to prevent accidental overwriting. The
G-sensor can be adjusted in the «Shock Sensitivity» menu where 10
is maximum value and 2 - minimum. Power consumption in this mode
is 90mA.
2. MVR operation with the «Parking Mode» on.
In this mode, once the ACC power is turned off, the MVR stops
recording the video and switches to the standby mode. If the
G-sensor detects an impact, the system will record a 60-90 sec
video at the speed of 30 frames per second. The resulting video file
will protect the file from overwriting. If the «Shock Sensitivity» is
disabled and the engine is off the G-sensor default sensitivity is 5.
Power consumption in this mode is 80mA.
10

Usage