Usage - Gazer MMR51 SERIES User Manual

• Car Rearview Mirror with built-in monitor and Super HD MVR
Gazer MMR51xх/MMR71xх/MUR51xх/MUR71xх is designed as a
ENG
replacement of the original mirror. The last digit of «xх» labeling
model indicates the type of mounting on the windshield compatible
with the bracing of certain car models.
• Gazer mirrors series MMR51xх/MMR71xх/MUR51xх/MUR71xх have
a built-in 4.3''(16:9) display supporting two video inputs and PAL or
NTSC videostandards (the monitor automatically detects the signal
format and switch to operate in the desired standard).
• When the built-in MVR is on, the image will be continuously displayed
on the screen. Use the ON/OFF button to switch the built-in display
on or off (the MVR will continue recording).
Camera video input is designed for receiving video feed from the
•
rear-view camera. When the car is driving in reverse (with video feed
provided by the rear-view camera), the image will be displayed on
the built-in monitor. Camera video input is prioritized: when the
MVR and the rear-view camera provide video feed simultaneously,
the monitor automatically switches to the rear-view camera viewing
mode. If the monitor was turned off by pressing the ON/OFF button,
it will turn on automatically when the Camera video input receives
video feed and turn off when the video feed is terminated. When
the rear-view camera is turned on, the MVR recording does not stop.
• Gazer MMR71xx/MUR71xx/MMR51xx/MUR51xx built-in monitor has
an automatic brightness adjustment function. This function is enabled
by default, and depending on the lighting conditions inside the car,
the monitor will automatically adjust the screen brightness to the
required level.
• When the built-in display receives video feed from the rear-view
camera, one can adjust the brightness setting by pressing the ON/
OFF button (brightness is set at a minimal level by default). The
selected brightness level will be stored in the device memory and
the next time the display is turned on, the brightness level will be set
automatically based on the last setting.
10

Usage