Usage - Gazer F122G User Manual

• To connect the MVR power supply cable to the car,
use the car's cigarette lighter socket power unit and a
USB cable with an angular mini USB connector for charg-
ing. Connect the power supply cable to the charger. The
angular mini USB connector must face the MVR.
• MVR switches to the recording mode automatically
when the power is on, pressing «REC/OK» manually
is not required. The recorder automatically shuts down,
saves the video and switches off when no power is sup-
plied for at least 5 seconds. Manual shutdown (before
you turn off the ignition) is not required.
• If necessary, you can manually turn off the MVR by
long pressing the «REC/OK» button. Use the same
button to turn it back on.
Note:
Do not turn off the recorder manually if it is in
the recording mode (this may damage the last record-
ing). First stop the recording by short pressing the
«REC/OK» button and then turn off the device. The
MVR can operate independently for a certain period
of time. The time of offline operation depends on the
condition and charge of the built in battery.
Recommendation:
minimum video length (1 minute).
Is this case, the pauses between videos will be
minimal.

Usage

Use the recording mode with a
ENG
9