Table of Contents
Advertisement
Reset Functions
To reset the pan, tilt, or all functions as if from startup:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Reset Function, or touch the display where it says Reset
Function.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Pan/Tilt, Iris/Prism, Color/CMY+CTO,
Gobo/Gobo Rotate, Zoom/Frost/Focus or All, or touch the display where it says the desired
option.
5.
Press <ENTER>.
Factory Reset
To restore the Maverick MK1 Spot to factory default settings, do the following:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory
Settings.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory
settings), or touch the display where it says the desired option.
5.
Press <ENTER>.
Test Mode
Auto Test
To perform an auto test of the Maverick MK1 Spot functions, follow the instructions below:
1.
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says
Test.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP> or <DOWN> to select Auto test, or touch the display where it says Auto test.
5.
Press <ENTER>.
Manual Test
To test the functions of the product manually, do the following:
1.
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says
Test.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP> or <DOWN> to select Manual test, or touch the display where it says Manual test.
5.
If using the buttons instead of the touchscreen, press <ENTER>.
6.
Use <UP> or <DOWN> to select the function to test, from Pan, Pan Fine, Tilt, Tilt Fine, P/T
Speed, Dimmer, Dimmer Fine, Shutter, Virtual Shaking, Cyan, Magenta, Yellow, CTO, Color,
Gobo, Gobo Rotate, Gobo Index, Gobo 2, Focus, Focus Fine, Focus Auto, Zoom, Zoom
Fine, Prism, Prism Rotate, Iris, Frost, CMY Macro, CMY Macro Speed, or Special Function,
or touch the display where it says the desired function
7.
If using the buttons instead of the touchscreen, press <ENTER>.
8.
Change the value of the tested function with one of the following methods:
Type the desired value using the number pad that shows on the touchscreen display.
or
Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value.
9.
Press <ENTER>.
Page 22 of 38
Maverick MK1 Spot User Manual Rev. 1
O
PERATION
Advertisement
Table of Contents
