Table of Contents
Advertisement
S
ETUP
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
•
Make sure to mount this product away from any flammable material as indicated in the
•
Make sure that the structure onto which you are mounting the product can support the product's
weight. See the
Technical Specifications
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
Procedure
The Maverick MK1 Spot comes with a double-bracketed yoke to which you can either attach mounting
clamps for hanging or simply use as a floor stand. You must supply the mounting clamps. Make sure the
clamps are capable of supporting the weight of this product. Use at least one mounting point per product.
For the CHAUVET Professional line of mounting clamps, go to
Mounting Diagram
Overhead Mounting
Maverick MK1 Spot User Manual Rev. 1
for weight information.
http://www.trusst.com/products.
Mounting Clamp
(such as CTC-50 or CTC-50HCN
from Chauvet)
Safety Cable
(such as CH-05 from
Chauvet)
Omega Bracket
Floor Mounting
Safety Notes
Page 9 of 38
Advertisement
Table of Contents
