Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Chauvet Mini Kinta
Summary of Contents for Chauvet Mini Kinta
- Page 1 User Manual...
-
Page 2: Table Of Contents
Auto/Sound Mode ..........................11 Color Control & Strobe ........................11 Master/Slave Mode ..........................12 5. Technical Information ....................13 Product Maintenance ........................ 13 6. Technical Specifications ....................14 Returns ............................. 15 Contact Us ..........................15 Page 2 of 15 Mini Kinta™ User Manual (Rev. 2) -
Page 3: Before You Begin
Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with CHAUVET® within 7 days of delivery. Text Convention... -
Page 4: Product At A Glance
This product is not intended for permanent installation. • Keep this User Manual for future use. If you sell the product to another user, be sure to give this document to the next owner. Page 4 of 15 Mini Kinta™ User Manual (Rev. 2) -
Page 5: Introduction
2. I NTRODUCTION Overview Microphone LED Display Safety Loop Indicator Lights Sensitivity Adjustment Knob Microphone Back Panel View Button Menu Power Out Fuse Holder Power In DMX In/Out Mini Kinta™ User Manual (Rev. 2) Page 5 of 15... -
Page 6: Dimensions
Dimensions Page 6 of 15 Mini Kinta™ User Manual (Rev. 2) -
Page 7: Setup
3. S ETUP AC Power The Mini Kinta™ has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 8: Power Linking
Product Product Other Products You can power link up to 26 Mini Kinta™ units on 120 VAC or up to 53 Mini Kinta™ units on 230 VAC. The power linking diagram shown above corresponds to the North American version of the product ONLY! If using the product in other markets, you must consult with the local CHAUVET®... -
Page 9: Mounting
Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Mini Kinta™ may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming. -
Page 10: Operation
DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels. The Mini Kinta™ uses up to 3 DMX channels in 3-CH DMX mode, which defines the highest configurable address to 510. -
Page 11: Dmx Channel Modes, Assignments, And Values
Press <ENTER> to select the color value and go to the next color. Repeat steps 3 and 4 for each subsequent color and its value. Press <ENTER> repeatedly to select the strobe speed Str1~Str3 (slow~fast). Mini Kinta™ User Manual (Rev. 2) Page 11 of 15... -
Page 12: Master/Slave Mode
Master/Slave The Master/Slave mode allows a single Mini Kinta™ unit (the “master”) to control the actions of one or more Mini Kinta™ units (the “slaves”) without the need of a DMX Mode controller. The master unit will be set to operate in auto/sound mode, while the slave units will be set to operate in slave mode. -
Page 13: Technical Information
Gently polish the glass surfaces until they are free of haze and lint. Always dry the glass surfaces carefully after cleaning them. Do not spin the cooling fan using compressed air because you could damage it. Mini Kinta™ User Manual (Rev. 2) Page 13 of 15... -
Page 14: Technical Specifications
135º Thermal Maximum External Temp. Cooling System 104° F (40° C) I/O Connectors Connector Type Channel Range 3-pin XLR Ordering Product Name Item Code UPC Number Mini Kinta™ 07050597 781462209452 Page 14 of 15 Mini Kinta™ User Manual (Rev. 2) -
Page 15: Returns
You must send the merchandise prepaid, in its original box, and with its original packing and accessories. CHAUVET® will not issue call tags. Clearly label the package with the RMA number. CHAUVET® will refuse any product returned without an RMA number.