Table of Contents
Advertisement
5. T
I
ECHNICAL
Product Maintenance
To maintain optimum performance and minimize wear, clean this product frequently. Usage and
environment are contributing factors in determining the cleaning frequency.
Clean this product at least twice a month. Dust build-up reduces light output performance and can cause
overheating. This can lead to reduced light source life and increased mechanical wear.
To clean the product:
1.
Unplug the product from power.
2.
Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
vents.
4.
Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5.
Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6.
Softly drag any dirt or grime to the outside of the transparent surface.
7.
Gently polish the transparent surfaces until they are free of haze and lint.
•
Always dry the transparent surfaces carefully after cleaning them.
•
Do not spin the cooling fans by blowing compressed air into them.
Error Indication
Indicator
Focus
Zoom
Prism
Prism R.
Gobo
Gobo R
Gobo 2
Color
Iris
Cyan
Magenta
Yellow
CTO
X_cm1
X_cm2
X_op
Y_cm
Y_op
X_da
Y_da
CPU_A
CPU_B
CPU_C
CPU_D
CPU_E
Head Fan 1
Head Fan 2
Base Fan 1
Base Fan 2
R_OPEN
R_SHORT
LED_HOT
Page 34 of 38
NFORMATION
Focus error detected
Zoom error detected
Prism error detected
Rotating prism error detected
Gobo wheel 1 error detected
Rotating gobo wheel 1 error detected
Gobo wheel 2 error detected
Color error detected
Iris error detected
Cyan error detected
Magenta error detected
Yellow error detected
CTO error detected
Pan magnetic sensor 1 error detected
Pan magnetic sensor 2 error detected
Pan optocoupler error
Tilt magnetic sensor error
Tilt optocoupler error
Pan wrong data
Tilt wrong data
IC-A error
IC-B error
IC-C error
IC-D error
IC-E error
Head fan 2 error detected
Head fan 2 error detected
Base fan 1 error detected
Base fan 2 error detected
Thermister open
Thermister short
LED overheat error
T
I
ECHNICAL
Description
Maverick MK1 Spot User Manual Rev. 1
NFORMATION
Advertisement
Table of Contents
