Table of Contents
Advertisement
Personality
To set which DMX personality to use, do the following:
1.
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Personality, or touch the display where it
says Personality
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX 22CH or DMX 29CH, or touch the
display where it says the desired option.
5.
If using the buttons instead of the touchscreen, press <ENTER>.
6.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (cancel) or YES (confirm) or touch the
display where it says the desired option.
7.
Press <ENTER>.
Settings
To reach the Settings menu, follow the instructions below:
1.
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Settings, or touch the display where it
says Settings.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
Control Mode
The Maverick MK1 Spot can be set to respond to DMX, WDMX, Art-Net™ or sACN. The protocol
configuration must be set for the product to respond correctly to the controller(s). See the Menu
Map for more information.
To configure the protocol for the Maverick MK1 Spot, follow the instructions below:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Control Mode, or touch the display where it says Control
Mode.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX, WDMX, sACN, ArtNet., or touch the
display where it says the desired option
5.
Press <ENTER>.
For WDMX control, ensure the antenna is raised and there are no obstructions
between the controller and the product. See WDMX Reset for troubleshooting
information.
Pan/Tilt Orientation
To set whether the pan or tilt orientation is normal or inverted:
1.
Navigate to the Settings menu
2.
Use <UP> or <DOWN> to select Pan Reverse or Tilt Reverse, or touch the display where it says
the desired setting.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted
orientation), or touch the display where it says the desired option.
5.
Press <ENTER>.
Display Orientation
To set which way the display faces, do the following:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Screen Reverse, or touch the display where it says Screen
Reverse.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES (display is
inverted), or AUTO (the display automatically detects which way the product is facing and orients
itself accordingly), or touch the display where it says the desired option.
5.
Press <ENTER>
Page 18 of 38
Maverick MK1 Spot User Manual Rev. 1
O
PERATION
Advertisement
Table of Contents
