Page 2
Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetprofessional.com...
Personality ....................18 Settings ......................18 Control Mode........................Pan/Tilt Orientation ......................Display Orientation......................Pan/Tilt Angle Range ..................... Blackout on Pan/Tilt Movement ..................Blackout on Color Movement ..................Blackout on Gobo Movement..................Maverick MK1 Spot User Manual Rev. 1 TOC 1 of 2...
Page 4
Error Indication....................34 6. Te c hnic al S pe c ific atio ns ............Photometrics Chart ..................36 7. Re turns ..................8. Co ntac t Us .................. TOC 2 of 2 Maverick MK1 Spot User Manual Rev. 1...
If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
• In the event of a serious operation problem, stop using this product immediately! If your Chauvet product requires service, contact Chauvet Technical Support. Expected LED Lifespan LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in clusters experience higher operating temperatures than single LEDs.
NTRODUCTION Description The Maverick MK1 Spot has an extremely flat field, CMY color mixing, a 5:1 zoom and multiple control options. Powered by a 350 W LED engine, it includes one static and one rotating gobo wheel, a 7 position + white color wheel, variable frost and 3-facet prism.
WDMX Antenna Power Power Data In Switch Fuse Ethercon Menu Display Data Out through Button ports Filters Fans Front Lens Mounting Points for Omega Brackets Rubber Rubber Feet Feet Page 6 of 38 Maverick MK1 Spot User Manual Rev. 1...
371 mm 8.90 in 226 mm 20.12 in 5.51 in 511 mm 140 mm 7.09 in 5.51 in 180 mm 140 mm 8.07 in 10.39 in 205 mm 264 mm Maverick MK1 Spot User Manual Rev. 1 Page 7 of 38...
Each Maverick MK1 Spot has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Maverick MK1 Spot, refer to the label affixed to the product. You can also refer to the Technical Specifications chart in this manual.
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. Procedure The Maverick MK1 Spot comes with a double-bracketed yoke to which you can either attach mounting clamps for hanging or simply use as a floor stand. You must supply the mounting clamps. Make sure the clamps are capable of supporting the weight of this product.
ETUP DMX Linking You can link the Maverick MK1 Spot to a DMX controller using a 3- or 5-pin DMX connection. If using other DMX-compatible products with this product, you can control each individually with a single DMX controller. DMX Personalities The Maverick MK1 Spot uses a 3- or 5-pin DMX data connection for the 22- and 29-channel DMX personalities.
4. O PERATION The Maverick MK1 Spot has a touchscreen display as well as 6 control buttons. Navigate the menu structure by pressing the buttons, touching the images of the buttons on the sides of the display, or touching the desired menu option on the display directly. The touchscreen can be locked and calibrated...
Page 14
Hold Loss of Data Loss of data setting Close Auto Fans Full Change the fan speed mode Linear Square Dimmer Curve Set the dimmer curve I Square Scurve Page 12 of 38 Maverick MK1 Spot User Manual Rev. 1...
Page 15
Test 000 ~ Individually test each function/ Yellow Manual Test Color channel Gobo Gobo Rotate Fine Gobo Index Gobo 2 Focus Focus Fine Focus Auto Zoom Zoom Fine Prism Maverick MK1 Spot User Manual Rev. 1 Page 13 of 38...
Page 16
Gobo 2 Channel 000 ~ Focus Status of individual channel Information Focus Fine Focus Auto Zoom Zoom Fine Prism Prism Rotate Iris Frost CMY Macro CMY Macro Speed Special Function Page 14 of 38 Maverick MK1 Spot User Manual Rev. 1...
Operating Settings Configuration Home Screen The Maverick MK1 Spot has a home screen that shows the protocol mode, the IP address or DMX address, the DMX personality, and the current product temperature. To see the home screen, press. <MENU> repeatedly until it appears on the display.
PERATION IP Mode The IP address of the Maverick MK1 Spot can be set manually, by the network, or to a pre-set static address specific to each product. To set the IP Mode, follow the instructions below: Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Repeat until the IP address is set as desired Press <ENTER>. In DHCP or Static IP Mode, the IP and SubMask menu settings have no effect on the product. Maverick MK1 Spot User Manual Rev. 1 Page 17 of 38...
If using the buttons instead of the touchscreen, press <ENTER>. Control Mode The Maverick MK1 Spot can be set to respond to DMX, WDMX, Art-Net™ or sACN. The protocol configuration must be set for the product to respond correctly to the controller(s). See the Menu Map for more information.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not calibrate) or YES (calibrate), or touch the display where it says the desired option. Press <ENTER>. Follow the instructions, touching the points as they appear on the display. Maverick MK1 Spot User Manual Rev. 1 Page 19 of 38...
Press <ENTER>. WDMX Reset To reset the WDMX connection from the Maverick MK1 Spot, do the following: Navigate to the Settings menu. Use <UP> or <DOWN> to select WDMX Reset, or touch the display where it says WDMX Reset.
Loss of Data In case of an input signal being lost in any way, the Maverick MK1 Spot will respond in one of two ways. The product will either hold the last signal received, or black out all LED output.
Test Mode Auto Test To perform an auto test of the Maverick MK1 Spot functions, follow the instructions below: Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says Test.
PERATION System Information All information about the current status of the Maverick MK1 Spot is available through the product’s Sys Info menu. To view this information, follow the instructions below: Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Page 26
15 m 17.5 m 20~60 m Auto-detect distance Zoom Narrow-wide Fine Zoom Fine control (16-bit) No function Prism Prism Effect Page 24 of 38 Maverick MK1 Spot User Manual Rev. 1...
Page 27
Pulse effect from slow to fast Random effect from slow to fast Open No function Virtual Shaking strobe, slow to fast Strobe Fade in/out, slow to fast Maverick MK1 Spot User Manual Rev. 1 Page 25 of 38...
Page 28
Open Clockwise gobo scroll, slow to fast Counter-clockwise gobo scroll, slow to fast Focus 0-100% Zoom Narrow-wide No function Prism Prism Effect Page 26 of 38 Maverick MK1 Spot User Manual Rev. 1...
Page 29
Fan full speed Fan auto No function Iris Fast mode Iris Smooth mode XY swap on XY swap off no function Maverick MK1 Spot User Manual Rev. 1 Page 27 of 38...
Push the gobo holder inwards. DO NOT force the gobo holder into the gobo wheel slot. If correctly installed, the gobo holder should easily slide into the gobo wheel slot. Diagram Locate Pull Back Remove Gobo Holder Gobo Retaining Spring Maverick MK1 Spot User Manual Rev. 1 Page 29 of 38...
This brings you into the Zero Adjust menu screen. Use <UP> or <DOWN> to select PAN. Press <ENTER>. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255. Press <ENTER>. Page 30 of 38 Maverick MK1 Spot User Manual Rev. 1...
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255. Press <ENTER>. PRISM Use <UP> or <DOWN> to select PRISM. Press <ENTER>. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255. Press <ENTER>. Maverick MK1 Spot User Manual Rev. 1 Page 31 of 38...
Press <ENTER>. Web Server The Maverick MK1 Spot Web Server can be accessed by any computer on the same network as the product. It allows network access to system information, settings such as control setup, manual testing of all functions, firmware updates, and the ability to change the Web Server password.
The Security page on the Web Server gives the option to change the password to the connected product’s web server. Enter the old password (admin, by default) and the new password twice, then click Save Settings to change the password. Maverick MK1 Spot User Manual Rev. 1 Page 33 of 38...
Head fan 2 error detected Base Fan 1 Base fan 1 error detected Base Fan 2 Base fan 2 error detected R_OPEN Thermister open R_SHORT Thermister short LED_HOT LED overheat error Page 34 of 38 Maverick MK1 Spot User Manual Rev. 1...
ETURNS ETURNS Send the product prepaid, in the original box, and with the original packing and accessories. Chauvet will not issue call tags. Call Chauvet and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return.
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., United Kingdom, Ireland, Mexico or Benelux, contact the dealer of record. Page 38 of 38 Maverick MK1 Spot User Manual Rev. 1...