Table of Contents
Advertisement
O
PERATION
Backlight Timer
To set the amount of time after inactivity before the display backlight turns off:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Backlight Timer, or touch the display where it says Backlight
Timer.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 30S (after 30 seconds of inactivity), 1M
(after 1 minute of inactivity), 5M (after 5 minutes of inactivity), or 30M (after 30 minutes of
inactivity), or touch the display where it says the desired option.
5.
Press <ENTER>.
Loss of Data
In case of an input signal being lost in any way, the Maverick MK1 Spot will respond in one of two ways.
The product will either hold the last signal received, or black out all LED output.
To set which way the product responds, follow the instructions below:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Loss of Data, or touch the display where it says Loss of Data.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Hold (hold last signal received) or Close
(black out all LED output), or touch the display where it says the desired option.
5.
Press <ENTER>.
Fan Speed
To set the speed of the fans, do the following:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Fans, or touch the display where it says Fans.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to product
temperature), Full (maximum speed), or ECO (quiet fans mode), or touch the display where it
says the desired option.
5.
Press <ENTER>.
Dimmer Curve
To set the dimmer curve, follow the instructions below:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Dimmer Curve, or touch the display where it says Dimmer
Curve.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square, I Squa, or SCurve, or
touch the display where it says the desired option.
5.
Press <ENTER>.
Dimmer Speed
To set the dimmer speed, do the following:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Dimmer Speed, or touch the display where it says Dimmer
Speed.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display
where it says the desired option.
5.
Press <ENTER>.
Maverick MK1 Spot User Manual Rev. 1
Page 21 of 38
Advertisement
Table of Contents
