Color Calibration; Reset Function; Factory Reset; Test Mode - Chauvet ROGUE R1X WASH User Manual

Color Calibration

To alter the color calibration settings:
1. Go to the Setup main level.
2. Select the Color Calibration option.
3. Select the calibration mode, from On (Uses factory default settings), Off (Sets all colors to
maximum output), or Custom (To set a custom white balance).
4. If Custom was selected, then select which color to edit, from RED, GREEN, or BLUE.
5. Increase or decrease the maximum output level of the selected color, from 100–255.

Reset Function

To reset specific functions or the entire product:
1. Go to the Setup main level.
2. Select the Reset Function option.
3. Select the functions to reset, from Pan/Tilt, Zoom, or All.
4. Select NO (to cancel) or YES (to reset the selected functions).

Factory Reset

To reset the product to factory settings:
1. Go to the Setup main level.
2. Select the Factory Set option.

Test Mode

Auto Test

To have the Rogue R1X Wash automatically test all functions one after the other:
1. Go to the Run Mode main level.
2. Select the Auto Test option.

Manual Test

To manually test an individual function of the Rogue R1X Wash:
1. Go to the Run Mode main level.
2. Select the Manual Test option.
3. Select a function to test, from Pan, Tilt, Dimmer, Shutter, Red, Green, Blue, White, or Zoom.
4. Increase or decrease the value of the selected function from 000–255 to test it.

System Information

The information section of the menu displays statistics and the current status of the product's various
functions. To view these information sections:
1. Go to the Sys Info main level.
2. Select the System Information option.

Offset Mode (Zero Adjust)

The Offset mode provides fine adjustments for the home position of every moving part in the optical path
as well as the pan and tilt movements. To adjust these options and prevent borders showing or reduction of
the light output:
1. From the main level screen, press and hold <MENU> until the passcode screen appears.
2. Enter the passcode: 2323 and press <ENTER>.
3. Select the "zero" position to adjust, from PAN, TILT, or ZOOM.
4. Adjust the "zero" position for the selected function from 000–255.
Page 22 of 26
Operation
Rogue R1X Wash User Manual Rev. 1