Table of Contents
Advertisement
Touchscreen Lock
To lock or unlock the touchscreen control panel, do the following:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Touchscreen Lock, or touch the display where it says
Touchscreen Lock.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch) or YES
(display will not respond to touch), or touch the display where it says the desired option.
5.
Press <ENTER>.
Lock the Screen
To lock the touchscreen control panel and menu buttons, do the following:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Lock Screen, or touch the display where it says Lock Screen.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch or
buttons) or YES (display will not respond to touch or buttons), or touch the display where it says
the desired option.
5.
Press <ENTER>.
To unlock the touchscreen and menu buttons, do the following:
1.
Touch the display touchscreen anywhere or push any menu button.
2.
Enter the passcode (0920) using the touchscreen or buttons.
Swap Pan and Tilt
To switch the pan and tilt functions so that what normally controls the pan controls the tilt and what
normally controls the tilt controls the pan, follow the instructions below:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Swap XY, or touch the display where it says Swap XY.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal pan and tilt)) or YES (pan
controls tilt, tilt controls pan), or touch the display where it says the desired option.
5.
Press <ENTER>.
Pan/Tilt Speed
To set the maximum speed of the pan and tilt:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select XY Mode, or touch the display where it says XY Mode.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Slow or Fast, or touch the display where it
says the desired option.
5.
Press <ENTER>.
WDMX Reset
To reset the WDMX connection from the Maverick MK1 Spot, do the following:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select WDMX Reset, or touch the display where it says WDMX Reset.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset connection), YES (reset
the connection), or touch the display where it says the desired option.
5.
Press <ENTER>.
Page 20 of 38
Maverick MK1 Spot User Manual Rev. 1
O
PERATION
Advertisement
Table of Contents
