Table of Contents
Advertisement
Fixture life counter
Fixture reset
Fixture
Channel
Level
8
255
16
240
Figure 3.10-1
CA-8 Easy Controller (Optional)
DMX-1655 Manual Version 1.11
1.
Press the MENU button until the displ a y reads-
2.
Press the ENTER button and the displ a y will read the number of hours the
fixture has been in operation.
3.
Press the MENU button to return to the main menu or leave for 5 seconds and
fixture will return to the normal displ a y.
Control Panel Reset
1.
Press the MENU button until the displ a y reads-
2.
Press the ENTER button to reset the fi x ture. All motors and mechanical parts will
return to the initial pow er-up positions.
DMX Reset
1.
On your DMX controller device set the follow i n g DMX level outputs shown in "Figure
3.10-1"
2.
The fi x ture will reset when both of the fi x ture channel s show n in "Figure 3.10-1"
receive the specified level s .
The easy remote controller is used only in master/slave mode. By connecting the 1/4"
microphone jack to the first unit, you w ill find that the remote control on the first unit w ill
control all the other units for Stand by, Strobe/Next/Strobe and Show 1/Slow /Show 2
functions.
Buttons
Function
STAND BY
Will blackout all units connected
FUNCTION or
In Show 1
STROBE/NEXT
In Slow
In Show 2
FAST/SLOW
LED Status
Off
On
Blinking
NO TE!
All movement and changes are sound activated except when in
SLOW Show 1 mode. In SLOW mode, color and gobo change is
user selectable using the "CA-8 Easy Controller".
.
.
Tap: Steps through color and gobo presets
Hold: Will strobe in w hite
Tap: Every 10 taps steps through each color and
th
the 11
tap changes the gobo. Repeat as necessary
to achieve desired result.
Tap: Steps through color and gobo presets
Hold: Will strobe in w hite
Mode
Show 1 (210° Tilt)
Slow Show 1 (Slow motion)
Show 2 (90° Tilt)
13
13
13
13
Advertisement
Table of Contents
