Table of Contents
Advertisement
O
PERATION
Pan/Tilt Angle Range
To set the range of motion the pan or tilt is permitted:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Pan Angle or Tilt Angle, or touch the display where it says the
desired setting.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 540 (540°), 360 or 270 (360° or 270° for
pan or tilt respectively), 180 (180°), or 90 (90°) or touch the display where it says the desired
option.
5.
Press <ENTER>
Blackout on Pan/Tilt Movement
To set whether the product will black out during pan or tilt movement, follow the instructions below:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select BL. O. P/T Move, or touch the display where it says BL. O. P/T
Move.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out
during movement), or touch the display where it says the desired option.
5.
Press <ENTER>.
Blackout on Color Movement
To set whether the product will black out during color movement, follow the instructions below:
1.
Navigate to the Settings menu
2.
Use <UP> or <DOWN> to select BL. O. Color Move, or touch the display where it says BL. O.
Color Move.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black
outduring movement), or touch the display where it says the desired option
5.
Press <ENTER>.
Blackout on Gobo Movement
To set whether the product will black out during color movement, follow the instructions below:
1.
Navigate to the Settings menu
2.
Use <UP> or <DOWN> to select BL. O. Gobo Move, or touch the display where it says BL. O.
Gobo Move.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out
during movement), or touch the display where it says the desired option
5.
Press <ENTER>.
Touchscreen Calibration
If the touchscreen is not responding correctly, it may need to be calibrated. To do so:
1.
Navigate to the Settings menu.
2.
Use <UP> or <DOWN> to select Calibration, or touch the display where it says Calibration.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not calibrate) or YES (calibrate), or
touch the display where it says the desired option.
5.
Press <ENTER>.
6.
Follow the instructions, touching the points as they appear on the display.
Maverick MK1 Spot User Manual Rev. 1
Page 19 of 38
Advertisement
Table of Contents
