Operation; Control Panel Operation; Control Options; Programming - Chauvet Colorado 1 Quad Zoom User Manual

O
PERATION
5. O
PERATION

Control Panel Operation

Button
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value in to the
<ENTER>
current function
Navigates upward through the menu list or increases the numeric value when in a
<UP>
function
Navigates downward through the menu list or decreases the numeric value when in a
<DOWN>
function

Control Options

Set the Colorado 1 Quad Zoom starting address in the 001-512 DMX range. This enables control of up to
20 products in the 25-channel FULL personality.

Programming

Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
• Press <MENU> repeatedly to exit to the previous main level.

Control Panel Lock

This setting enables you to activate or disable the control panel lock, which keeps unauthorized users from
changing the product's settings.
1. Go to the SET main level.
2. Enter the master access passcode as shown in Passcode.
3. Select KEY.
4. Select ON or OFF.
When the control panel lock is activated, in order to access the products main
programming level, the product will prompt for the passcode. Enter the
passcode as described below.

Passcode

After being prompted to enter the passcode:
Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>

Settings Lock

This setting enables you to activate or disable the settings lock, which keeps unauthorized users from
changing the programming levels under the SET main level.
1. Go to the SET main level.
2. Enter the master access passcode as shown in
3. Select SLCK.
4. Select ON or OFF.
When the settings lock is activated, in order to access the SET programming
levels, the product will prompt you to enter the passcode. Enter the passcode as
described in Passcode.
Colorado 1 Quad Zoom User Manual Rev. 1
Function
Passcode
Page 10 of 29