Table of Contents
Advertisement
O
PERATION
5. O
PERATION
Control Panel Operation
Button
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value in to the
<ENTER>
current function
Navigates upward through the menu list or increases the numeric value when in a
<UP>
function
Navigates downward through the menu list or decreases the numeric value when in a
<DOWN>
function
Control Options
Set the Colorado 3 Solo starting address in the 001-512 DMX range. This enables control of up to 46
products in the 11-channel 11CH personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
•
To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
•
To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
•
Press <MENU> repeatedly to exit to the previous main level.
Control Panel Lock
This setting enables you to activate or disable the control panel lock, which keeps unauthorized users from
changing the product's settings.
1.
Go to the Key main level
2.
Select ON or OFF
When the control panel lock is activated, in order to access the products main
programming level, the product will prompt for the passcode. Enter the
passcode as described below.
Passcode
After being prompted to enter the passcode:
Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
Colorado 3 Solo User Manual Rev. 2
Function
Page 10 of 30
Advertisement
Table of Contents
