Table of Contents
Advertisement
4. Operation
Control Panel Operation
Button
Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function
Battery Powered Display
Press and hold until menu screen appears (approximately 15 seconds).
Control Options
Set the COLORado Panel Q40 starting address in the 001–512 DMX range. This enables control of up to
22 products in the 23-channel 23Ch personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
•
To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
•
To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
•
Press <MENU> repeatedly to exit to the previous main level.
Control Panel Lock
The setting locks or unlocks the control panel.
1. Go to the Key Lock main level.
2. Select On (locks control panel) or Off (control panel stays unlocked).
When the control panel lock is activated, the product will prompt for the passcode
in order to access the menu. Enter the passcode as described below.
Passcode
After being prompted to enter the passcode, press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
Page 8 of 20
COLORado Panel Q40 User Manual Rev. 1
Operation
Advertisement
Table of Contents
